Rear Camber Adjustment

1. Raise and support vehicle.
2. Remove tire and wheel assembly.
3. Remove auxiliary spring. Refer to Leaf Spring
4. Remove strut/upper auxiliary spring bracket/stabilizer shaft bracket, if equipped.
5. Place strut in vise.
6. File lower strut to knuckle attaching hole oblong.
7. Place auxiliary spring assembly in vise.
8. File lower strut attaching hole oblong.
9. Place stabilizer bracket in vise.
10. File lower stabilizer bracket to strut attaching hole oblong.
11. Attach strut assembly/stabilizer shaft bracket/upper auxiliary spring bracket to knuckle.
12. Install strut to body bolts and break hose bracket.
13. Install auxiliary spring and install tire and wheel assembly.
14. Adjust camber, then torque strut to knuckle nuts to 136 ft. lbs.
15. Check and adjust toe if necessary.