Starter Motor: Service and Repair

1. Disconnect battery ground cable.
2. Remove cooling fan assembly.
3. Remove serpentine drive belt.
4. Remove A/C compressor upper support brace.
5. Lay A/C compressor in fan opening.
6. Raise and support vehicle.
7. Disconnect engine oil cooler lines at flex connection.
8. Remove bolts from flywheel inspection cover.
9. Remove bolts from starter.
10. Disconnect starter motor wiring.
11. Remove starter motor.
12. Reverse procedure to install. Torque starter motor attaching bolts to 32 ft. lbs.