LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Disabling & Activating Air Bag System >> Activating System >> Component Replacement Activating Procedure

Component Replacement Activating Procedure

  1. Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored energy. Disconnect air bag simulators from seat belt pretensioner harness connectors and reconnect seat belt pretensioners. Disconnect air bag simulator from passenger-side air bag module harness connector, reconnect and install passenger-side air bag module.
  2. Disconnect air bag simulator from lower clockspring harness connector. Reconnect lower clockspring harness connector, install insulator, reinforcement and steering column lower finish panel. Reconnect negative battery cable. Perform system operation check. See SYSTEM OPERATION CHECK  . Reprogram pre-set radio frequencies and set clock.
scientia non olet · About LEMON Manuals