LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Automatic >> Removal & Installation >> Fixed Orifice Tube >> Removal

Fixed Orifice Tube: Removal

  1. Disconnect battery. Discharge A/C system, using approved refrigerant recovery/recycling equipment. Disconnect refrigerant line from evaporator core. Cap line to protect against dirt and moisture entering system.
  2. Pour a small amount of clean refrigerant oil into evaporator core inlet tube to lubricate evaporator tube and fixed orifice tube "O" rings. Engage Fixed Orifice Tube Remover/Installer (T83L-19990-A) with 2 tangs on orifice tube. See Figure.
  3. Hold "T" handle on remover, and run remover nut down against evaporator core tube until A/C evaporator orifice is pulled from evaporator core tube. See Figure.
scientia non olet · About LEMON Manuals