Lateral Arm: Assembly

CAUTION: If installing a new Watts link pivot or lateral arms, mark the new part in the same place the old part was marked during disassembly. Make sure the marks are lined up correctly during assembly. Failure to do so can cause premature wear of the bushings or, on a vehicle equipped with air suspension, incorrect ride height, resulting in poor ride and handling.

CAUTION: If installing a new Watts link pivot, make sure it is facing the right direction. "FRONT" is stamped on the Watts link pivot. Failure to do so will result in damage to the Watts link.

Follow the disassembly procedure in reverse order.