Shaft Seal: Installation
- Install compressor shaft seal protector onto compressor shaft. Lubricate NEW shaft seal with refrigerant oil. DO NOT touch sealing surfaces. Engage seal remover/installer into seal notches and install seal onto compressor shaft. Remove seal protector and remover/installer.
- Install seal snap ring. Install felt washer and felt ring. Install clutch plate, clutch pulley, shims, and clutch coil. See CLUTCH ASSEMBLY . See Fig 1. After repairs, add refrigerant oil to compressor equal to amount drained. To complete installation, reverse removal procedure. Perform leak test.
Courtesy of GENERAL MOTORS CORP.