LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Compressor Servicing >> NIPPONDENSO 10S15/10S17/10S20 >> Clutch Assembly >> Removal

Clutch Assembly: Removal

  1. Raise and suitably support the vehicle (if necessary).
  2. Remove the engine protection shield.
  3. Install a ratchet into the A/C belt tensioner adapter opening.
  4. Rotate the A/C belt tensioner clockwise in order to relieve the tension on the belt. See Figure.
  5. Remove the A/C belt from the A/C compressor.
  6. Slowly release the tension on the A/C belt tensioner.
  7. Remove the clutch plate retaining bolt.
  8. Remove the clutch plate assembly. See Figure.
  9. Remove the clutch hub/bearing snap ring.
  10. Remove the clutch hub/bearing assembly.
  11. Remove the snap ring from the clutch coil.
  12. Remove the clutch coil from the A/C compressor.
scientia non olet · About LEMON Manuals