LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Manual >> Removal & Installation >> Shaft Seal >> Installation

Shaft Seal: Installation

    CAUTION: To prevent refrigerant system contamination, do not allow dirt or other foreign materials to enter the A/C compressor.
  1. Clean the A/C compressor nose area.
  2. Place the shaft seal on the special tool. Lubricate the shaft seal and the special tool with PAG oil or equivalent.
  3. Position the shaft seal and the special tool over the A/C compressor shaft.
  4. Push the shaft seal onto the A/C compressor shaft with the special tool until seated.
  5. Install the shaft seal snap ring with the sharp edge facing up.
  6. Carry out the A/C compressor external leak test. See A/C COMPRESSOR -- EXTERNAL LEAK TEST .
  7. Install the shaft seal felt.
  8. Install the A/C clutch. See CLUTCH & CLUTCH FIELD COIL .
scientia non olet · About LEMON Manuals