LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 4.6L >> In-Vehicle Repair >> Valve Seals >> Installation

Valve Seals: Installation

    NOTE: The valve stem seal must be bottomed on the valve seat.
    NOTE: Make sure that the garter spring is present in the valve stem seal.
    Fig 1: Identifying Valve Stem Seal Replacer & Valve Stem Seal
    G01941295Courtesy of FORD MOTOR CO.
  1. Use the (A) Valve Stem Seal Replacer to install the (B) valve stem seals.
  2. Install the valve springs. For additional information, refer to VALVE SPRINGS .
scientia non olet · About LEMON Manuals