LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 4.6L >> In-Vehicle Repair >> Oil Pressure Sender >> Removal & Installation

Removal & Installation

  1. Remove the oil pressure sensor oil pressure sensor:
    • Disconnect the connector.
    • Remove the oil pressure sensor.
    Fig 1: Identifying Oil Pressure Sensor & Connector
    G01941365Courtesy of FORD MOTOR CO.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals