LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Removal And Installation >> Motor - Windshield Wiper >> Removal and Installation

Removal and Installation

  1. Remove the mounting arm and pivot shaft assembly. For additional information, refer to MOUNTING ARM AND PIVOT SHAFT .
  2. Remove the windshield wiper motor cover.
  3. Disconnect the wiper motor linkage.
    1. Remove the clip.
    2. Disconnect the linkage.
    Fig 1: Disconnecting Wiper Motor Linkage
    G03445301Courtesy of FORD MOTOR CO.
  4. Remove the windshield wiper motor.
    1. Remove the bolts.
    2. Remove the motor.
    Fig 2: Removing Windshield Wiper Motor
    G03445302Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals