Removal and Installation

Remove the air cleaner assembly.
Position the washer pump and reservoir aside.
1. Remove the bolts.
2. Position the washer pump and reservoir aside.
Fig 1: Positioning Washer Pump And Reservoir Aside
Courtesy of FORD MOTOR CO.

WARNING: Windshield washer solution contains methanol which is poisonous. Observe all cautions and warnings indicated on label of washer solution container. Failure to follow these instructions may result in personal injury.

NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.

Fig 2: Removing Washer Pump And Reservoir

Courtesy of FORD MOTOR CO.

Remove the washer pump and reservoir.
1. Disconnect the electrical connectors.
2. Disconnect the washer hose.
3. Remove the washer pump and reservoir.
Remove the washer pump.

CAUTION: Do not operate the windshield washer pump prior to filling the windshield reservoir.

To install, reverse the removal procedure.