Removal and Installation

Remove the seat. For additional information, refer to FRONT SEAT .
Release the J-clip.

Fig 1: Releasing J-Clip
Courtesy of FORD MOTOR CO.
Release the J-clip.

Fig 2: Locating J-Clip
Courtesy of FORD MOTOR CO.
Disconnect the connector.
Remove the bolts.

Fig 3: Removing Connector Bolts
Courtesy of FORD MOTOR CO.
Remove the pivot bolt.

Fig 4: Removing Pivot Bolt
Courtesy of FORD MOTOR CO.
Remove the seat backrest.
To install, reverse the removal procedure.
Check the active restraint system for correct operation.