Removal & Installation
- Disconnect negative battery cable. Remove driver's side underdash panel pin retainers. Disconnect courtesy lamp harness connector. See STEP 1 in Fig 1.
- Locate Lighting Control Module (LCM) above accelerator pedal. If vehicle is equipped with adjustable pedals, remove accelerator pedal. See ADJUSTABLE ACCELERATOR PEDAL
under REMOVAL & INSTALLATION in MODULE COMMUNICATIONS - CROWN VICTORIA & GRAND MARQUIS article. Remove LCM holding bracket screws. Unclip module from mounting bracket. See STEP 2 in Fig 1.
- Disconnect LCM harness connectors. See STEP 3 in Fig 1. To install, reverse removal procedure.
Courtesy of FORD MOTOR CO.