Removal & Installation

Remove the floor console finish panel. For additional information, refer to FLOOR CONSOLE - FINISH PANEL ASSEMBLY .
Remove the console glove compartment.
- Disconnect the electrical connector.
Fig 1: Identifying Console Glove Compartment
Courtesy of FORD MOTOR CO.
Disconnect the floor console electrical connector.
- Release the connector from the shifter.
Fig 2: Identifying Floor Console Electrical Connector
Courtesy of FORD MOTOR CO.
Position the shifter assembly aside.
1. Remove the four nuts.
2. Disconnect the electrical connector.
Fig 3: Disconnect Electrical Connector & Remove Nuts
Courtesy of FORD MOTOR CO.
Remove the floor console bolts.

Fig 4: Identifying Floor Console Bolts
Courtesy of FORD MOTOR CO.
Remove the floor console.
1. Position the shifter assembly aside.
2. Slide the floor console rearward to remove.
Fig 5: Removing Floor Console
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.