Multifunction Switch: Notes

Disconnect the battery ground cable. For additional information refer to GENERATORS & REGULATORS .
Remove the ignition switch lock cylinder.
1. Insert the ignition key into the ignition switch lock cylinder and turn to the RUN position.
2. Push the ignition switch lock cylinder release tab with a punch while pulling out the ignition switch lock cylinder.
Fig 1: Removing Ignition Switch Lock Cylinder
Courtesy of FORD MOTOR CO.
Remove the tilt wheel handle and shank.

Fig 2: Removing Tilt Wheel Handle And Shank
Courtesy of FORD MOTOR CO.
Remove the upper and lower steering column shrouds.
1. Remove the screws.
2. Remove the shrouds.
Fig 3: Removing Upper And Lower Steering Column Shrouds
Courtesy of FORD MOTOR CO.
Remove the multifunction switch.
1. Remove the screws.
2. Disconnect the electrical connectors.
3. Remove the switch.
Fig 4: Removing Multifunction Switch
Courtesy of FORD MOTOR CO.