LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> Diagnosis & Testing >> Engine >> Excessive Engine Oil Consumption >> Oil Pressure Test

Oil Pressure Test

  1. Disconnect and remove the oil pressure sensor (9278) from the engine.
  2. Connect the Engine Oil Pressure Gauge to the oil pressure sender oil galley port.
  3. Run the engine until normal operating temperature is reached.
  4. Run the engine at the specified RPM and record the gauge reading.
  5. The oil pressure should be within specifications.
  6. If the pressure is not within specification, check the following possible sources:
    • Insufficient Oil
    • Oil Leakage
    • Worn Or Damaged Oil Pump
    • Oil Pump Screen Cover And Tube (6622)
    • Excessive Main Bearing Clearance
    • Excessive Connecting Rod Bearing Clearance
scientia non olet · About LEMON Manuals