LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat System >> Removal And Installation >> Front Seat Backrest >> Removal and Installation

Removal and Installation

  1. Remove the seat. For additional information, refer to FRONT SEAT .
  2. Release the J-clip.
    Fig 1: Releasing J-Clip
    G02213451Courtesy of FORD MOTOR CO.
  3. Release the J-clip.
    Fig 2: Locating J-Clip
    G02213452Courtesy of FORD MOTOR CO.
  4. Disconnect the connector.
  5. Remove the bolts.
    Fig 3: Removing Connector Bolts
    G02213453Courtesy of FORD MOTOR CO.
  6. Remove the pivot bolt.
    Fig 4: Removing Pivot Bolt
    G02213454Courtesy of FORD MOTOR CO.
  7. Remove the seat backrest.
  8. To install, reverse the removal procedure.
  9. Check the active restraint system for correct operation.
scientia non olet · About LEMON Manuals