LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat System >> Removal And Installation >> Seat Position Sensor >> Removal and Installation

Removal and Installation

  1. Remove the driver seat. For additional information, refer to FRONT SEAT .
  2. Remove the seat position sensor.
    1. Remove the bolt.
    2. Remove the connector.
    3. Press the sensor tab inward to release and remove the sensor.
      Fig 1: Removing Connector And Sensor
      G02213475Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
  4. Check the active restraint system for correct operation.
scientia non olet · About LEMON Manuals