LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel & Console >> Removal & Installation >> Instrument Panel - Cluster Finish Panel >> Removal & Installation

Removal & Installation

  1. Remove the audio unit. For additional information, refer to AUDIO UNIT .
  2. Remove the RH instrument panel finish panel.
    • Disconnect the electrical connectors.
    Fig 1: Identifying RH Instrument Panel Finish Panel
    G00403160Courtesy of FORD MOTOR CO.
  3. Remove the LH instrument panel finish panel.
    • Disconnect the electrical connectors.
    Fig 2: Identifying LH Instrument Panel Finish Panel
    G00403161Courtesy of FORD MOTOR CO.
  4. Place the gearshift lever in the 1 position.
  5. Place the steering column in the full down position.
  6. Remove the instrument panel cluster finish panel.
    1. Remove the screws.
    2. Remove the instrument panel cluster finish panel.
      • Disconnect the electrical connectors.
    Fig 3: Removing Instrument Panel Cluster Finish Panel
    G00403162Courtesy of FORD MOTOR CO.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals