LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Parking Brake Control >> Installation

Parking Brake Control: Installation

  1. Position the parking brake control.
  2. Install the parking brake control retaining bolts. See Fig 13 .
  3. Connect the front parking brake cable and conduit to the parking brake control. See Figure .
  4. Connect the electrical connector to the parking brake switch. See Fig 12 .
  5. Install the parking brake release vacuum hose to the parking brake release control motor. See Fig 11 .
  6. Pull the instrument panel slightly rearward and remove the wood block. See Fig 10 .
  7. Install the instrument panel retaining bolts. See Fig 8 and Fig 9 .
  8. Install the shake brace bolt. See Fig 7 .
  9. Install the Powertrain Control Module (PCM).
  10. Place the bulkhead wiring connector into the bulkhead.
  11. Connect the bulkhead wiring connector and install the retaining bolt. See Fig 6 .
  12. Install the powertrain control module retaining bolt.
  13. Install the instrument panel steering column opening cover reinforcement and the retaining bolts. See Fig 4 .
  14. Install the instrument panel steering column cover, parking brake release handle and retaining screws. See Fig 3 .
  15. Connect the parking brake release handle cable to the parking brake control. See Fig 2 .
  16. Install the instrument close-out panel and install the pushpins. See Figure .
  17. Install the cowl side trim panel and scuff plate. See Fig 1 .
  18. Raise the vehicle.
  19. Connect the front parking brake cable and conduit to the cable connector. See Figure .
  20. Adjust the parking brake cable tension. See PARKING BRAKE  under ADJUSTMENTS.
  21. Lower the vehicle.
  22. Connect the battery ground cable.
Fig 1: Removing & Installing Cowl Side Trim Panel & Scuff Plate
G00297403Courtesy of FORD MOTOR CO.
Fig 2: Removing & Installing Parking Brake Release Handle Cable To Parking Brake Control
G00297404Courtesy of FORD MOTOR CO.
Fig 3: Locating Steering Column Cover Retaining Screws
G00297405Courtesy of FORD MOTOR CO.
Fig 4: Locating Steering Column Cover Reinforcement Screws
G00297406Courtesy of FORD MOTOR CO.
Fig 5: Locating PCM Wiring Connector Retaining Bolt
G00297407Courtesy of FORD MOTOR CO.
Fig 6: Locating Bulkhead Wiring Connector
G00297408Courtesy of FORD MOTOR CO.
Fig 7: Locating Shake Brace Screw
G00297409Courtesy of FORD MOTOR CO.
Fig 8: Locating Instrument Panel Retaining Bolts (1 Of 2)
G00297410Courtesy of FORD MOTOR CO.
Fig 9: Locating Instrument Panel Retaining Bolts (2 Of 2)
G00297411Courtesy of FORD MOTOR CO.
Fig 10: Positioning Instrument Panel
G00297412Courtesy of FORD MOTOR CO.
Fig 11: Locating Parking Brake Release Vacuum Hose
G00297413Courtesy of FORD MOTOR CO.
Fig 12: Locating Parking Brake Switch Electrical Connector
G00297414Courtesy of FORD MOTOR CO.
Fig 13: Locating Parking Brake Control Retaining Bolts
G00297415Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals