LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 4.6L >> In-Vehicle Repair >> Oil Level Indicator & Tube >> Removal & Installation

Removal & Installation

  1. Remove the exhaust manifold. For additional information, refer to EXHAUST MANIFOLD - LH .
  2. Remove the oil level indicator tube.
    • Remove the bolt.
    • Remove the tube.
    Fig 1: Identifying Oil Level Indicator Tube Bolt
    G01941366Courtesy of FORD MOTOR CO.
  3. Inspect the O-ring seal.
    Fig 2: Identifying Oil Level Indicator Tube O-Ring Seal
    G01941367Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
    Fig 3: Tightening Oil Level Indicator Tube Bolt
    G01941368Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals