LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 4.6L >> Disassembly & Assembly Of Subassemblies >> Piston - Pin Connecting Rod Assembly, Floating Pin >> Assembly

Piston - Pin Connecting Rod Assembly, Floating Pin: Assembly

    NOTE: Connecting rod must be installed into piston with identification markings toward front.
    Fig 1: Identifying Identification Markings
    G01941580Courtesy of FORD MOTOR CO.
  1. Position the connecting rod in the piston.
  2. Lubricate the piston pin and pin bore with clean engine oil.
    Fig 2: Identifying Piston Pin & Pin Bore
    G01941581Courtesy of FORD MOTOR CO.
  3. Install the piston pin in the piston and connecting rod assembly.
    Fig 3: Installing Piston Pin In Piston & Connecting Rod Assembly
    G01941582Courtesy of FORD MOTOR CO.
  4. Install the piston pin retaining clips in the piston.
    Fig 4: Identifying Piston Pin Retaining Clips
    G01941583Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals