LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis (Single Page) >> General Information >> Engine >> Engine System - General Information >> General Procedures >> Crankshaft - Connecting Rod Journal Taper, Out Of Round

Crankshaft - Connecting Rod Journal Taper, Out Of Round

  1. Measure the crankshaft connecting rod journal diameters in two directions perpendicular to one another at each end of the connecting rod journal. The difference in the measurements from one end to the other is the taper. Verify measurement is within the wear limit.
    • Refer to SPECIFICATIONS .
    • If out of specification, install new components as necessary.
    Fig 1: Measuring Crankshaft Connecting Rod Journal Taper, Out Of Round
    G01941791Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals