LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - Removal, Overhaul & Installation) >> Evaporative Emissions Systems >> Evaporative System Purge Valve >> Removal & Installation

Removal & Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect evaporative emission canister purge valve harness connector. Disconnect evaporative emission return tube. Disconnect the evaporative emission test port. Remove vacuum hose. Remove two nuts and evaporative emission canister purge valve.
  2. To install, reverse the removal procedure. Perform after repair procedure. See AFTER REPAIR PROCEDURE .
scientia non olet · About LEMON Manuals