Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Crash Bracket Bolt | 18 (25) | |||
| Cylinder Head Temperature Sensor | 20 (27) | |||
| EGR Tube Nut | 30 (40) | |||
| EGR Valve Bolt | 14-16 (18-22) | |||
| Engine Coolant Temperature Sensor | 15 (20) | |||
| Exhaust-To-Convertor Nut | 21 (29) | |||
| Fuel Tank Support Strap Nut | 26 (35) | |||
| Heated Oxygen Sensor | 30 (41) | |||
| Intake Manifold Bolt | 18 (25) | |||
| Spark Plug | 11 (15) | |||
| Thermostat Housing Bolt | 18 (25) | |||
| INCH Lbs. (N.m) | ||||
| Accelerator Cable Bracket Bolt | 53 (6) | |||
| Alternator-To-Intake Manifold Bracket Bolt | 89 (10) | |||
| Camshaft Position Sensor Bolt | 89 (10) | |||
| Crankshaft Position Sensor Bolt | 89 (10) | |||
| Engine Cover Bolt | 89 (10) | |||
| EVAP Canister Fastener | 53 (6) | |||
| EVAP Purge Valve Nut | 68-72 (7.6-10.4) | |||
| Fuel Filler Screw | 27-35 (3-4) | |||
| Fuel Injection Supply Manifold | 89 (10) | |||
| Fuel Pump Module Bolt | 80-107 (9-12) | |||
| Generator Harness Nut | 89 (10) | |||
| Idle Air Control Valve Bolt | 89 (10) | |||
| PCM Cover Nut | 53 (6) | |||
| PCM Harness Bolt | 53 (6) | |||
| Throttle Body Bolt | ||||
| Step 1 | 89 (10) | |||
| Step 2 | (1) | |||
| Throttle Position Sensor Bolt | 27 (3) | |||
| Upper Intake Manifold Bolt | 89 (10) | |||
|
||||