LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls - System & Component Tests - EEC-V - Gasoline) >> Emission Systems & Sub-Systems >> Fuel Evaporation >> EVAP Canister Purge Valve

EVAP Canister Purge Valve

WARNING: This page is about a different variant/trim than selected.
NOTE: EVAP canister purge valve resistance reading must be taken with engine cooled down.

Turn ignition switch to OFF position. Disconnect EVAP canister purge valve. Using a DVOM, measure resistance between EVAP canister purge valve terminals. If resistance is not 30-38 ohms, replace EVAP canister purge valve. Perform EVAPORATIVE EMISSIONS SYSTEM LEAK TEST  under EVAPORATIVE EMISSION SYSTEM TESTS to verify repair. If resistance is 30-38 ohms, EVAP canister purge valve is okay. If fault is still present, perform TEST HX: EVAPORATIVE EMISSION MONITOR & SYSTEM under SYSTEM TESTS in SELF-DIAGNOSTICS - EEC-V - GASOLINE & NGV article.

scientia non olet · About LEMON Manuals