Lack/Loss Of Power: Notes

WARNING: This page is about a different variant/trim than selected.

NOTE: Ensure symptom is reported under normal driving conditions without excessive engine/vehicle load. PCM is equipped with an engine RPM/speed limit function. If programmed speed is exceeded, fuel delivery will shut off and DTC P1270 will be set in PCM memory. If vehicle is equipped with a Knock Sensor (KS), a lack of power may result when vehicle is operated with a breakout box installed at PCM. KS circuits are not shielded in the breakout box, and KS signal noise may be noticed by PCM. If this happens, spark timing will be retarded and a lack of power may result.