Removal & Installation (Front Doors)
CAUTION:
When prying out power window switch plate, use a shop towel or similar material between tool and front door trim panel or damage to front door trim panel may occur.
NOTE:
Use care not to damage trim panel when removing screws.
On left front door, pry out and position power window switch plate aside. Disconnect harness connectors. See Figure.
On right front door, pry out and position power window switch plate aside. Remove switch plate harness connector screws and disconnect harness connectors. See Figure.
On both front doors, remove screw covers and remove screws. Remove interior door handle cup and remove screws. Remove front door trim panel and disconnect harness connector. See Figure. To install, reverse removal procedure.
