Programming Method A
NOTE:
Prior to performing programming method, refer to HELPFUL HINTS .
Do not press brake pedal during Remote Entry programming procedure as it will immediately exit you from that mode. Electronically unlock the vehicle prior to attempting to enter Remote Entry Programming Mode. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. All doors will lock then unlock to confirm programming mode. Within 20 seconds, press any button on 1st remote transmitter. Door locks will cycle to confirm programming. Within 20 seconds, press any button on 2nd transmitter (up to 4 transmitters total possible). Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.