Transmission Drive Cycle Test
NOTE:
The transmission drive cycle test must be followed exactly. Malfunctions have to occur 4 times consecutively for continuous codes P0781, P0782 and P0783 to set, and 5 times consecutively for continuous codes P0741 and P1741 to set.
- After repairing any engine performance-related DTCs, erase remaining transmission codes. Warm engine to normal operating temperature. Ensure transmission fluid level is correct.
- With transmission in Overdrive, moderately accelerate from a standstill to 50 MPH. Hold speed and throttle position steady for at least 15 seconds.
- While maintaining speed with transmission in Overdrive, lightly depress brake pedal and release (to operate brakelights). Hold speed for at least an additional 5 seconds. Bring vehicle to a complete stop for at least 20 seconds with gearshift lever in "D" position.
- Repeat steps 2 and 3 at least 5 times. Perform QUICK TEST and record any continuous memory codes. See RETRIEVING DIAGNOSTIC TROUBLE CODES (QUICK TEST) .