TCC & Shift Solenoids (Bench Mode)

This procedure ensures TCC and shift solenoids may be turned on or off. Ensure gearshift lever is in "P" position, with ignition on and engine off. Follow procedure in order to test appropriate solenoid.

• Select OSC mode.
• Select Trans-Bench Mode.
• Select PIDs to be monitored.
• Monitor all selected PIDs during test.
• Select Parameters (SSA, SSB or TCC).
• Press ON, and then SEND to turn solenoid on.
• Press OFF, and then SEND to turn solenoid off.
• Press XXX, and then SEND at any time to cancel any command sent.