Solenoid Valve - Non-Functional: Installation

NOTE: Be sure the new air spring solenoid is fully seated into both stages of the air spring.

NOTE: Check the solenoid valve O-rings for abrasion or cuts. Replace O-rings as required using air spring connector repair kit (5B321).

NOTE: Lightly apply Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A or equivalent meeting Ford specification ESE-M1C171-A to the O-rings.

NOTE: When installing the air lines, make sure the white air line is fully inserted into the fitting for correct installation.

To install, reverse removal procedure.
- After installing the solenoid, it is necessary to inflate the air suspension system; refer to RIDE HEIGHT ADJUSTMENTS .