Speaker Walk-Around Test

NOTE: To enter the speaker walk-around test or ACM self-diagnostic mode, the ACM must be turned on and in radio tuner mode (AM/FM).

1. To enter the speaker walk-around test, simultaneously press the ACM Preset Buttons 3 and 6 (1 and 3 for ULC radio only).
2. The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the ACM in the following sequence: RF, LF, LR, RR.
3. The speaker walk-around test automatically continues and tests Subwoofer 1, Subwoofer II and for speaker short (P100i only). If a short is present, SPKR SHORT will be displayed.