LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2005 >> Mountaineer 2WD V8-4.6L SOHC VIN W >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Lighting and Horns >> Brake Light Switch >> Service and Repair

Brake Light Switch: Service and Repair

STOPLAMP SWITCH







Removal and Installation
1. Remove the stop lamp switch retaining pin.
2. Remove the stoplamp switch bushing.
3. Disconnect the electrical connector.
4. Remove the stoplamp switch.
5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals