Before Pinpoint Tests

Before Pinpoint Tests

NOTE: Prior to entering pinpoint tests, check the Powertrain Control Module (PCM) wiring harness for correct connections, bent or broken pins, corrosion, loose wires, correct routing, correct seals and their condition. Check the PCM, sensors and actuators for damage. Refer to Computers and Control Systems.

NOTE: If a concern still exists after electrical diagnosis, refer to Diagnosis By Symptom [1][2]Diagnosis By Symptoms

If DTC's appear while carrying out the on-board diagnostics, refer to the Diagnostic Trouble Code Charts for the appropriate repair procedure. Diagnostic Trouble Code Chart Prior to entering pinpoint tests, refer to any TSBs and OASIS messages for transmission concerns.