Front Bumper Cover / Fascia: Service and Repair

FRONT BUMPER COVER

Part 1:

Part 2:

Exploded View

Removal and Installation
1. If equipped, disconnect the fog lamp electrical connectors.
2. If equipped, disconnect the side lamp/front turn signal electrical connectors.
3. Remove the front fender inner splash shield screws.
4. Remove the front fender inner splash shield pin-type retainers.
5. Remove the front fender inner splash shields.
6. Remove the bumper cover upper screws.
7. Rotate the bottom of the front bumper cover upward.
8. Apply downward pressure to the top of the front bumper cover to release the 4 retaining tabs.
9. To install, reverse the removal procedure.