Pedal Vibration or ABS Operation Sound Occurs

Pedal Vibration or ABS Operation Sound Occurs

CAUTION:
Under the following conditions, ABS is activated and vibration is felt when brake pedal is lightly depressed (just place a foot on it). However, this is normal.
^ When shifting gears
^ When driving on slippery road
^ During cornering at high speed
^ When passing over bumps or grooves [at approximately 50 mm (1.97 in) or more]
^ When pulling away just after starting engine [at approximately 10 km/h (6 MPH) or higher]

1. SYMPTOM CHECK 1
Check if there is pedal vibration or operation sound when the engine is started.
Do symptoms occur?
YES >> GO TO 2.
NO >> Perform self-diagnosis. Refer to, "CONSULT-III Function (ABS)". Consult-III Function (ABS)

2. SYMPTOM CHECK 2
Check symptoms when electrical component (headlamps, etc.) switches are operated.
Do symptoms occur?
YES >> Check if there is a radio, antenna, antenna lead wire, or wiring close to the control unit. If there is, move it farther away.
NO >> Go to procedure 3 "CHECK WHEEL SENSOR AND SENSOR ROTOR". Refer to, "Excessive ABS Function Operation Frequency". Excessive ABS Function Operation Frequency