Warning Lamp and Indicator Lamp Circuit

Warning Lamp and Indicator Lamp Circuit

INSPECTION PROCEDURE

1. CHECK SELF-DIAGNOSIS RESULTS
Perform ABS actuator and electric unit (control unit) self-diagnosis.
OK or NG
OK >> GO TO 2.
NG >> Check items displayed by self-diagnosis. Refer to, "CONSULT-III Function (ABS)". Consult-III Function (ABS)

2. CHECK COMBINATION METER
Check the indication and operation of combination meter are normal. Refer to, "Self-Diagnosis Mode of Combination Meter". Self-Diagnosis Function
OK or NG
OK >> INSPECTION END
NG >> Combination meter is malfunctioning. Repair or replace combination meter. Refer to. Service and Repair