Removal & Installation

Headlight (High Beam) 

• 1. Headlight (High Beam) Bulb - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Left side: Remove the coolant reservoir

  2. Disconnect the connector

  3. Turn the bulb socket (A) 45° counterclockwise to remove the bulb.

• 2. All Removed Parts - Install the parts in the reverse order of removal.

  Headlight (Low Beam) 

• 1. Headlight (Low Beam) Bulb - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Disconnect the connector

  2. Turn the bulb socket (A) 45° counterclockwise to remove the bulb.

• 2. All Removed Parts - Install the parts in the reverse order of removal.

  Front Turn Signal Light/Front Side Marker Light/Front Parking Light (Without LED Daytime Running Light) 

• 1. Front Turn Signal Light Bulb - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Left side: Remove the coolant reservoir

  2. Disconnect the connector

  3. Turn the bulb socket (A) 45° counterclockwise to remove it

  4. Remove the bulb (B).

• 2. All Removed Parts - Install the parts in the reverse order of removal.

  Front Turn Signal Light/Front Side Marker Light (With LED Daytime Running Light) 

• 1. Front Side Marker Light Bulb - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Left side: Remove the coolant reservoir

  2. Disconnect the connector

  3. Turn the bulb socket (A) 45° counterclockwise to remove it

  4. Remove the bulb (B).

• 2. All Removed Parts - Install the parts in the reverse order of removal.

  Taillight 

• 1. Taillight (Upper Taillight) - Remove 
• 2. Taillight (Upper Taillight) Bulb - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Turn the bulb socket (A) 45° counterclockwise to remove it

  2. Remove the bulb (B).

• 3. All Removed Parts - Install the parts in the reverse order of removal.

  Brake Light/Taillight 

• 1. Taillight (Lower Taillight) - Remove 
• 2. Brake Light/Taillight Bulb - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Turn the bulb socket (A) 45° counterclockwise to remove it

  2. Remove the bulb (B).

• 3. All Removed Parts - Install the parts in the reverse order of removal.

  Rear Turn Signal Light 

• 1. Taillight (Lower Taillight) - Remove 
• 2. Rear Turn Signal Light Bulb - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Turn the bulb socket (A) 45° counterclockwise to remove it

  2. Remove the bulb (B).

• 3. All Removed Parts - Install the parts in the reverse order of removal.

  Back-Up Light 

• 1. Taillight (Lower Taillight) - Remove 
• 2. Back-Up Light Bulb - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Turn the bulb socket (A) 45° counterclockwise to remove it

  2. Remove the bulb (B).

• 3. All Removed Parts - Install the parts in the reverse order of removal.