Test Procedure

1. Driver's Dashboard Undercover - Remove - Refer to: Passenger's Dashboard Undercover Removal and Installation Driver's Dashboard Undercover Removal and Installation
2. Brake Pedal Position Switch - Test

Courtesy of HONDA, U.S.A., INC.

Courtesy of HONDA, U.S.A., INC.

1. Disconnect the connector.

2. Check for continuity between the terminals in each switch position according to the table.

3. If the test results are not as specified, adjust the brake pedal position switch (A) , then recheck. If the results are still not as specified, replace the brake pedal position switch .
3. All Removed Parts - Install - Install the parts in the reverse order of removal.