Cruise Control Combination Switch Removal, Installation, & Test: Test

1. Cruise Control Combination Switch - Test

Courtesy of HONDA, U.S.A., INC.

1. Measure the resistance between cruise control combination switch 12P connector terminals No. 2 and No. 5 according to the table. If there is no resistance in one or more positions, replace the cruise control combination switch.

Position	Resistance
OFF	About 2.2 kΩ
Cruise control main (PRESSED)	About 60 Ω
Cancel (PRESSED)	About 190 Ω
Set/- (PRESSED)	About 450 Ω
Res/+ (PRESSED)	About 900 kΩ

Courtesy of HONDA, U.S.A., INC.

2. Check for continuity between cruise control combination switch 12P connector terminals No. 1 and No. 6 according to the table. If there is no continuity, replace the cruise control combination switch.