Front Lower Arm Compliance Bush Removal & Installation: Installation

Courtesy of HONDA, U.S.A., INC.

1. Clean the mating surfaces of a new bushing and the lower arm

2. Apply a mild soap and water to the bushing surface

3. Align the angle of the lower arm (A) and the tab portion (B) of the bushing (C).

NOTE: 

• The installed bushing's tab portion points upward and downward to the installed lower arm.
• Make sure the up/down direction of the bushing.

4. Press in the bushing by hand first.

Courtesy of HONDA, U.S.A., INC.

5. Support the lower arm (A) on suitable square lumber (B) as shown 6. Press in the bushing (C) with a suitable socket (D) and a hydraulic press 7. Adjust the distance between the top of the lower arm (E), and the bushing surface to the dimension shown.