Steering Lock Removal & Installation: Installation

SRS components are located in this area. Review the SRS component locations , and the precautions and procedures before doing repairs or service.

1. 1. Steering Lock - Install

   Without keyless access 

   Courtesy of HONDA, U.S.A., INC.

   With keyless access 

   Courtesy of HONDA, U.S.A., INC.

   1. Install the steering lock (A)

   2. Loosely tighten new shear bolts (B).

   NOTE:  The shear bolts have left-hand threads.

   3. Without keyless access system: Insert the ignition key, and check for proper operation of the steering wheel lock and that the ignition key turns freely.

   Courtesy of HONDA, U.S.A., INC.

   4. Tighten the shear bolts (A) until the hex heads (B) twist off. NOTE:  The shear bolts have left-hand threads.

2. 2. Immobilizer-Keyless Control Unit - Install (Without Keyless Access System)
3. 3. Steering Column - Install 
4. 4. Immobilizer Key - Registrate (Without Keyless Access System)
5. 5. Immobilizer Key Registration