Removal & Installation

1. Front Floor Undercover - Remove - Refer to: Middle Floor Undercover Removal and Installation Rear Floor Undercover Removal and Installation Front Floor Undercover Removal and Installation
2. Knock Sensor - Remove

Fig 1: Knock Sensor With Torque Specifications
Courtesy of HONDA, U.S.A., INC.

1. Disconnect the connector (A)

2. Remove the knock sensor (B).
3. All Removed Parts - Install

Courtesy of HONDA, U.S.A., INC.

1. Install the parts in the reverse order of removal.

NOTE:
- Make sure the direction of the sensor connector (A) is as shown.
- Do not use impact tools, hand tools only on installation.