12 Volt Battery Sensor Removal & Installation: Installation

1. 12 Volt Battery Sensor - Install

Courtesy of HONDA, U.S.A., INC.

1. Install the 12 volt battery sensor (A) to the 12 volt battery.

NOTE:
- Make sure the areas between the terminal and the 12 volt battery sensor (A) is clean.
- To protect the connector (B) from damage, do not hold it when installing the terminal (C).
2. Install the cable (D) on the 12 volt battery sensor (A)

3. Connect the connector (E)

4. Apply multipurpose grease to the terminals to prevent corrosion.