12 Volt Battery Terminal Disconnection & Reconnection: Disconnection

1. 12 Volt Battery Terminal - Disconnect

Courtesy of HONDA, U.S.A., INC.

1. Make sure the vehicle to the OFF (LOCK) mode

2. Disconnect and isolate the cable with the 12 volt battery sensor (A) from the 12 volt battery.

NOTE:
- Always disconnect the negative side first.
- To protect the 12 volt battery sensor connector (B) from damage, do not hold it when removing the terminal.
- Do not disconnect the 12 volt battery sensor from the cable (C).
3. Disconnect the terminal (D) from the 12 volt battery.