Power Mirror Actuator Test: Test

1. Front Door Panel - Remove

2. Power Mirror Actuator - Test

Courtesy of HONDA, U.S.A., INC.

1. Disconnect the connector.

Courtesy of HONDA, U.S.A., INC.

Actuator Test

2. Check the actuator operation by connecting 12 volt battery power and ground according to the table.

3. If the mirror fails to work properly, the power mirror actuator is faulty; replace the power mirror .

Defogger Test

4. Check for continuity between power mirror actuator 13P connector terminals No. 4 and No. 12. There should be continuity.

5. If there is no continuity, check for an open or high resistance in the wire between the connector and the mirror holder. If the wire is OK, replace the mirror holder .

3. All Removed Parts - Install the parts in the reverse order of removal.