Side Windshield Trim Removal & Installation: Installation

Courtesy of HONDA, U.S.A., INC.

Except USA Factory Model 

1. Clean the body bonding surface with a shop towel dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the clean surface

2. Apply the two-part epoxy adhesive (A) on the clip (B) as shown.

Courtesy of HONDA, U.S.A., INC.

3. Line up the retainers (A, B) with the alignment marks (C) on the body, then press the adhesive portion (D) into place securely 4. Wait for adhesive to dry. NOTE:  Refer to the adhesive manufacturer's instructions in dry time.

Courtesy of HONDA, U.S.A., INC.

USA Factory Model  1. Install the retainers (A, B) to the pins (C) on the A-pillar.

Courtesy of HONDA, U.S.A., INC.

1. Install the side windshield trim (A).