Test Procedure

1. Tailgate Pull Pocket - Remove - Refer to: Interior Trim Removal and Installation - Pillar Areas Interior Trim Removal and Installation - Tailgate Areas Interior Trim Removal and Installation - Cargo Areas Interior Trim Removal and Installation - Rear Side Area Interior Trim Removal and Installation - Door Areas
2. Power Tailgate Inside Switch - Test

Courtesy of HONDA, U.S.A., INC.

Courtesy of HONDA, U.S.A., INC.

1. Check for continuity between the terminals in each switch position according to the table.

2. If the continuity is not as specified, replace the bulb.

3. If the continuity is still not as specified, replace the power tailgate inside switch (A) .
3. All Removed Parts - Install - Install the parts in the reverse order of removal.